The fixed grate combustion system is a very simple and effective system, and it is widespread in certain applications due to its reliability and robustness. At INNERGY we have more than 50 years of experience designing, manufacturing and commissioning combustion systems for a wide variety of fuels, among which we find different types of conventional biomass, complex biomass and waste.
At INNERGY, since we started manufacturing and designing combustion systems, we have not stopped developing and improving this technology.
A fixed grate combustion system is recommended for those projects where solid fuels are used, such as simple biomasses with low ash content and medium humidity. This is the main part of the equipment where the combustion process of the biomass or waste used takes place. The fixed grate is constituted mainly by a set of cast iron grates on which the biomass for combustion is located. This is known as the combustion surface and its proper dimensioning as a function of the defined power is fundamental.
Together with the biomass industrial boiler, the combustion chamber with fixed grate is entirely designed and manufactured at the INNERGY factory.
The fixed grate is located inside the combustion furnace, just before the body of heat recovery in the form of thermal oil, water or steam, to which all the heat generated by the biomass or waste yields. This combustion furnace is made up of a metallic structure, which must be correctly dimensioned and covered with refractory brick with a high content of alumina, to guarantee a long service life for both the fixed grate and the combustion chamber.
Equipment capable of reaching powers up to 8,000,000 kcal/h
Constructed on site in accordance with our plans and specifications
Biomasses, several types. Wide ranges of humidity and size
Avoids high temperatures and heat losses in the work zone
Between the chamber and the chimney
LOAD LEVEL CONTROL
In the event of excessive filling
CENTRIFUGAL COMBUSTION AIR IMPELLER FAN
It has a speed variator, introducing the air in the furnace and refrigerating the grates to improve and reactivate combustion
AUTOMATIC LOADING. PNEUMATIC DISPENSER SYSTEM
Suitable, uniform load guaranteed throughout the grate. Avoids incoming cold air and possible delays in the combustion flame
CONTROL AND SAFETY
Allow efficient development
MANUAL ACCESS DOOR
Adaptation to special requirements. Other voltages and electrical frequencies for different countries
With refractory bricks with high alumina content, separated from the outside wall by low-density spongy insulating bricks
INTEGRATION IN FACILITIES/PLANTS
With PLC and touchscreen
COMBUSTION CHAMBER EXTERIOR
Face brick and treadplate in passage area
Laboratory for studying plant combustion of all kinds of biomass, depending on the type,...
The Hospital Complex responds to the needs of 600,000 people, and regroups two...
Vapours from the various digesters are captured and additional polluted air in the most...
INNERGY has carried out the improvement project for the district heating with biomass of the University of Valladolid, which will be fully...
Last May Innergy made its first appearance in FuturEnergy magazine with an article that dealt with comprehensive technological solutions to...
INNERGY adds a new reference in the field of ORC technology, allowing the efficient and sustainable management of a pellet manufacturing...
Contact us for ...