• CYCLONES:

The purpose of cyclones is to clean the gases by making use of the rotation, centrifugation and reverse direction process which the gases suffer when entering the cyclone, generally offering emission values below 150 mg/Nm3, depending on the type of product.

  • MULTICYCLONES:

Multicyclone products are designed to clean gases. This cleaning is carried out by making use of the rotation, centrifugation and reverse direction process which the gases suffer when entering the cyclones which make up this equipment and which form a single filtering body with less height and volume than would be necessary with a single cyclone. Emissions are generally produced with values below 150 mg/Nm3, whilst the performance of the facility is also improved thanks to our exchanger products which make use of the hot gases at output.

  • ELECTRO FILTERS

Among our purification systems, characterised by their low load loss and practically zero maintenance cost, we find the purification electro filters. Gas purification systems based on ionisation of particles from electric field capable of achieving emissions of 30 mg/Nm3.

  • SLEEVE FILTERS

Equipment designed to capture particles in a wide collection interval.

  • PHYSICAL-CHEMICAL TREATMENT

The waste generated in any facility must be treated before emission into the atmosphere, as set out in the regulations of any relevant organisation. ERATIC offers physical-chemical treatment systems with excellent results in line with required standards.



Plant for combustion of biomass and utilization of hot combustion gases for thermal drying of biomass

Plant for combustion of biomass and utilization of hot combustion gases for thermal...

Utilization of waste from ginning cotton producing energy for drying

Combustion plant of waste from ginning cotton, with an approximate capacity of 2,000...

Contact us

Contact us for ...

I accept the conditions of the Privacy Policy